4x4 Forum | 4x4 Mecca Logo 8
Home Register

Go Back   4x4 Forum | 4x4 Mecca > 4x4 and Tech Forums > Truck Gallery > Build Ups
Reload this Page

[Build in Progress] 1989 Toyota SAS Build


Reply
Page 2 of 6 < 1 2 34 > Last »
 
LinkBack Thread Tools Display Modes
Old May 1st, 2007, 04:21 AM   #11 (Link to post)
"The Long Black Train"
Points: 49,141, Level: 31 Points: 49,141, Level: 31 Points: 49,141, Level: 31
Level up: 87% Level up: 87% Level up: 87%
Activity: 0% Activity: 0% Activity: 0%
 
MaXXis85's Avatar
 
Joined: February 2007
Location: Leonville, Louisiana
Posts: 195
Default Re: 1989 Toyota SAS Build
Thanks. I want it funtional, but not look flipping hack either.
__________________
1989 Toyota Pickup Specs
2005 K2500HD LQ4/4l80e/263/9.25/10.5/4.10's/285's Tow Rig/DD
1989 Toyota Pickup 3VZE/RF150F/VF1A/8.0/8.0/5.29's/SAS/3"BL/Locked/38 TSL'S
MaXXis85 is offline   Reply With Quote
Old May 1st, 2007, 10:31 AM   #12 (Link to post)
Moderator
Points: 174,513, Level: 59 Points: 174,513, Level: 59 Points: 174,513, Level: 59
Level up: 59% Level up: 59% Level up: 59%
Activity: 16% Activity: 16% Activity: 16%
 
mikey_d05's Avatar
 
Name: Mike
Joined: November 2006
Location: New Ulm, MN
Posts: 1,847

Awards Showcase
MOTM 
Total Awards: 1

Default Re: 1989 Toyota SAS Build
Cool build!

I'm gonna be putting one-tons, dual cases, 4.7's, etc. etc. into an '87 Runner pretty soon.
__________________
2007/2008 Tube Buggy Rawkfist Specs
Quote:
Originally Posted by cybrfire
It's only a street truck. I'm thinking it needs 38's
mikey_d05 is offline   Patriotic 5/6 - I can fix almost any problem I come across. Reply With Quote
Old May 1st, 2007, 11:03 AM   #13 (Link to post)
"The Long Black Train"
Points: 49,141, Level: 31 Points: 49,141, Level: 31 Points: 49,141, Level: 31
Level up: 87% Level up: 87% Level up: 87%
Activity: 0% Activity: 0% Activity: 0%
 
MaXXis85's Avatar
 
Joined: February 2007
Location: Leonville, Louisiana
Posts: 195
Default Re: 1989 Toyota SAS Build
That will be fun. you doing 2.ish stock low range in crawlerbox and 4.7s in rear case?
__________________
1989 Toyota Pickup Specs
2005 K2500HD LQ4/4l80e/263/9.25/10.5/4.10's/285's Tow Rig/DD
1989 Toyota Pickup 3VZE/RF150F/VF1A/8.0/8.0/5.29's/SAS/3"BL/Locked/38 TSL'S
MaXXis85 is offline   Reply With Quote
Old May 1st, 2007, 11:16 AM   #14 (Link to post)
Moderator
Points: 174,513, Level: 59 Points: 174,513, Level: 59 Points: 174,513, Level: 59
Level up: 59% Level up: 59% Level up: 59%
Activity: 16% Activity: 16% Activity: 16%
 
mikey_d05's Avatar
 
Name: Mike
Joined: November 2006
Location: New Ulm, MN
Posts: 1,847

Awards Showcase
MOTM 
Total Awards: 1

Default Re: 1989 Toyota SAS Build
Yep, 4.7's in the rear case, I'm gonna put a 4340 output in right away as well. But that's neither here 'nor there, I'll post a thread when I actually start in on it. You have a killer build going and make sure to keep us updated.
__________________
2007/2008 Tube Buggy Rawkfist Specs
Quote:
Originally Posted by cybrfire
It's only a street truck. I'm thinking it needs 38's
mikey_d05 is offline   Patriotic 5/6 - I can fix almost any problem I come across. Reply With Quote
Old May 2nd, 2007, 06:31 PM   #15 (Link to post)
"The Long Black Train"
Points: 49,141, Level: 31 Points: 49,141, Level: 31 Points: 49,141, Level: 31
Level up: 87% Level up: 87% Level up: 87%
Activity: 0% Activity: 0% Activity: 0%
 
MaXXis85's Avatar
 
Joined: February 2007
Location: Leonville, Louisiana
Posts: 195
Default Re: 1989 Toyota SAS Build
I did some more wrenching and got the Birfeilds packed full of high temp grease, put the gaskets, shafts, spindles, backing plates, ans outer spindle to wheel seall. here are he pics. 2 are the axle assembly, one shows the high steer arm


__________________
1989 Toyota Pickup Specs
2005 K2500HD LQ4/4l80e/263/9.25/10.5/4.10's/285's Tow Rig/DD
1989 Toyota Pickup 3VZE/RF150F/VF1A/8.0/8.0/5.29's/SAS/3"BL/Locked/38 TSL'S
MaXXis85 is offline   Reply With Quote
Old May 7th, 2007, 09:17 PM   #16 (Link to post)
Why yes, it is a 1wd.
Points: 1,065,398, Level: 100 Points: 1,065,398, Level: 100 Points: 1,065,398, Level: 100
Level up: 0% Level up: 0% Level up: 0%
Activity: 18% Activity: 18% Activity: 18%
 
4x4 Mecca's Avatar
 
Name: Branndon
Joined: July 2006
Location: Orange County, Ca
Posts: 4,559

Awards Showcase
MOTM 
Total Awards: 1

Default Re: 1989 Toyota SAS Build
Awesome, thanks for the updates.
__________________
2007 Kymco Agility Specs
Help my dream come true! http://bit.ly/3llapJ
Voting Stats! http://bit.ly/2DevmS
4x4 Mecca is offline   Patriotic 4/6 - If it breaks, I can usually fix it. Reply With Quote
The Following User Says Thank You to 4x4 Mecca For This Useful Post:
MaXXis85 (May 8th, 2007)
Old May 8th, 2007, 04:33 AM   #17 (Link to post)
"The Long Black Train"
Points: 49,141, Level: 31 Points: 49,141, Level: 31 Points: 49,141, Level: 31
Level up: 87% Level up: 87% Level up: 87%
Activity: 0% Activity: 0% Activity: 0%
 
MaXXis85's Avatar
 
Joined: February 2007
Location: Leonville, Louisiana
Posts: 195
Default Re: 1989 Toyota SAS Build
Well JSYGK wheel studs can be a bitch without a press. So i bucked up and drove to my grandpas to use his press. I wanted to get the wheel hubs and lockouts on to complete the axle rebuild but that did not happen. Damned wheel stud. Just one wheel stud
__________________
1989 Toyota Pickup Specs
2005 K2500HD LQ4/4l80e/263/9.25/10.5/4.10's/285's Tow Rig/DD
1989 Toyota Pickup 3VZE/RF150F/VF1A/8.0/8.0/5.29's/SAS/3"BL/Locked/38 TSL'S
MaXXis85 is offline   Reply With Quote
Old May 10th, 2007, 04:43 AM   #18 (Link to post)
"The Long Black Train"
Points: 49,141, Level: 31 Points: 49,141, Level: 31 Points: 49,141, Level: 31
Level up: 87% Level up: 87% Level up: 87%
Activity: 0% Activity: 0% Activity: 0%
 
MaXXis85's Avatar
 
Joined: February 2007
Location: Leonville, Louisiana
Posts: 195
Default Re: 1989 Toyota SAS Build
Well last night I got progress so here what the details are.
Packed inner and outer wheel bearings and drove races into wheel hubs. Installed wheel hubs on the spindles, then put the lockout hubs on the wheel hubs. Then the tie rod was installed and I got the toe in set good enough til I measure it with tires on for an accurate measurement. I have a picture on my camera of the entire axle assmbly but I forgot to upload the pic and my camera is at home. Tomm guys
__________________
1989 Toyota Pickup Specs
2005 K2500HD LQ4/4l80e/263/9.25/10.5/4.10's/285's Tow Rig/DD
1989 Toyota Pickup 3VZE/RF150F/VF1A/8.0/8.0/5.29's/SAS/3"BL/Locked/38 TSL'S
MaXXis85 is offline   Reply With Quote
Old June 13th, 2007, 04:49 AM   #19 (Link to post)
"The Long Black Train"
Points: 49,141, Level: 31 Points: 49,141, Level: 31 Points: 49,141, Level: 31
Level up: 87% Level up: 87% Level up: 87%
Activity: 0% Activity: 0% Activity: 0%
 
MaXXis85's Avatar
 
Joined: February 2007
Location: Leonville, Louisiana
Posts: 195
Default Re: 1989 Toyota SAS Build
I did some work finally. I took my springs out of the cardboard boxes and installed all the spring bushings, shackles and bolts through the springs. Now I need to actually put those bad boys under the truck. Seems like maybe i can wrench this weekend, But a side job popped up. So the opportunity to make money will prolly happen.
__________________
1989 Toyota Pickup Specs
2005 K2500HD LQ4/4l80e/263/9.25/10.5/4.10's/285's Tow Rig/DD
1989 Toyota Pickup 3VZE/RF150F/VF1A/8.0/8.0/5.29's/SAS/3"BL/Locked/38 TSL'S
MaXXis85 is offline   Reply With Quote
Old June 30th, 2007, 02:04 PM   #20 (Link to post)
"The Long Black Train"
Points: 49,141, Level: 31 Points: 49,141, Level: 31 Points: 49,141, Level: 31
Level up: 87% Level up: 87% Level up: 87%
Activity: 0% Activity: 0% Activity: 0%
 
MaXXis85's Avatar
 
Joined: February 2007
Location: Leonville, Louisiana
Posts: 195
Default Re: 1989 Toyota SAS Build
I shall post pics later on tonight or tomm morning. I got the IFS out and the leaf springs up front hung. TOmm ill put the axle in and set my shock hoops and start the rear.
__________________
1989 Toyota Pickup Specs
2005 K2500HD LQ4/4l80e/263/9.25/10.5/4.10's/285's Tow Rig/DD
1989 Toyota Pickup 3VZE/RF150F/VF1A/8.0/8.0/5.29's/SAS/3"BL/Locked/38 TSL'S
MaXXis85 is offline   Reply With Quote
Reply
Page 2 of 6 < 1 2 34 > Last »

Tags
(Build in Progress), 1989, build, sas, toyota

« Previous Thread | Next Thread »
Thread Tools
Display Modes
Linear Mode Linear Mode

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
[Build in Progress] Project Torque Build 4x4 Mecca Build Ups 11 August 27th, 2008 01:37 PM
Axle info - Toyota 4x4 Mecca Tech Database Posts 0 March 23rd, 2007 12:05 PM
Toyota Forum 4x4 Mecca Tech Database Posts 0 March 14th, 2007 07:34 PM
Toyota owners, read this! 4x4 Mecca Tech Database Posts 0 March 14th, 2007 07:33 PM
(Suspension) 1986-1995 4" IFS lift for Toyota Truck or 4-Runner MaXXis85 4x4 Tech Talk 4 February 25th, 2007 04:54 AM


Contact Us - 4x4 Mecca | 4x4 Forum - Archive - Top

Powered by vBulletin® Version 3.7.0 Beta 6
Copyright ©2000 - 2010, Jelsoft Enterprises Ltd.
SEO by vBSEO 3.2.0 RC5
Copyright 4x4Mecca.com
Design by HTWoRKS

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55