You can now vote for 4x4 Mecca! Please vote now.

Go Back   4x4 Forum | 4x4 Mecca > 4x4 and Tech Forums > The Tech Database > Tech Database Posts

Reply
 
LinkBack Thread Tools Display Modes
Old June 26th, 2007, 10:36 PM   #1 (Link to post)
That's Mr.4x4Mecca to you
Points: 5,075,658, Level: 100 Points: 5,075,658, Level: 100 Points: 5,075,658, Level: 100
Level up: 0% Level up: 0% Level up: 0%
Activity: 0% Activity: 0% Activity: 0%
 
4x4 Mecca's Avatar
 
Name: Branndon
Joined: July 2006
Location: Orange County, Ca
Posts: 6,335

Awards Showcase
MOTM 
Total Awards: 1

Default XJ shaft install - CK5 Forums

A new entry has been added to The 4x4 Mecca Tech Database

Description: This is on my '88 K5. Some of the older steering boxes won't work with this swap due to having a bigger splined end on the steering box. I don't know the years or models off hand, but I'm sure someone on here does.

Once I got the shaft home I took the two halves apart and cleaned it up and painted it. The shaft that I got had plastic inserts that kept the two halves from moving. I just drilled them out and threw away the inserts. The pic’s below show where I drilled and where the inserts were. The holes were already there. That's where the plastic inserts had nubs that stuck in there.

To check it out, rate it or add comments, visit XJ shaft install - CK5 Forums
The comments you make there will appear in the posts below.
__________________

Having a bad day? - Control-Alt-A | Want to see all new site activity? Control-Alt-N
4x4 Mecca is offline   Patriotic 4/6 - If it breaks, I can usually fix it. Reply With Quote
Reply

Tags
ck5, forums, install, shaft

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

Similar Threads
Thread Thread Starter Forum Replies Last Post
Winch Install Pics on a 1996(no 56K) - FSB Forums 4x4 Mecca Tech Database Posts 0 March 30th, 2007 09:23 PM
Douber Install and Review 4x4 Mecca Tech Database Posts 0 March 13th, 2007 04:32 PM
Shackle Flip Install on a Full Size Bronco 4x4 Mecca Tech Database Posts 0 March 13th, 2007 03:58 PM
York Install Link in a Full Size GM cbbr Tech Database Posts 12 March 13th, 2007 03:24 PM
4x4 Mecca Member Article - York Install in a Full Size GM for $100 4x4 Mecca Tech Database Posts 0 March 13th, 2007 03:21 PM


Copyright 4x4Mecca.com

SEO by vBSEO 3.2.0 RC5